| No. | Brand | L | d | F | J | H | Z | D | S |
| VSI200544-N | INA | 135 mm | - | - | 95 mm | - | - | - | - |
| VSA250955-N | INA | - | - | 58.5 mm | - | - | - | 100 mm | - |
| VSU250955 | - | - | 35 mm | - | - | - | 30 mm | - | 17.5 mm |
| VSA200644-N | - | - | - | - | - | - | - | - | - |
| VSU200414 | - | - | - | - | - | - | - | - | - |
| VSU200744 | - | 85 mm | - | - | - | - | 18.5 mm | - | 15.9 mm |
| VSA200744-N | - | 100 mm | - | - | - | 47.6 mm | - | - | 9.5 mm |
| VSI200644-N | - | 197.5 mm | - | - | - | 52.4 mm | - | - | 21.4 mm |
| VSI200414-N | - | - | 15 mm | - | - | - | - | - | - |
| VSI250855-N | - | 90 mm | - | - | 130 mm | - | - | - | 17.5 mm |
| VSA200644-N Four point contact ball bearings (External gear teeth) | B:30.2 mm; C:35.1 kN; A2:33.7 mm; Designation of bearing:ES210-30G2T20; T min.:-20 °C; N:14mm; e:1 mm; d1:67.2 mm; B1:43.7 mm; Weight:2.25 kg; |
| VSI200644-N slewing ring bearings (internal gear teeth) | H:52.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:21.4 mm; T max.:100 °C; Designation of bearing:EX209G2T04; Designation of housing:PLE209N-; L:197.5 mm; G:M6x1; d1:62 mm; C0:20.8 kN; |
| VSU200744 Four point contact ball bearings (no gear teeth) | A1:25 mm; G:M6x1; L:85 mm; Z:18.5 mm; Designation of housing:PG206N-; A:48 mm; C:19.5 kN; C0:11.2 kN; H1:17 mm; S:15.9 mm; |
| VSI200544-N INA spec slewing ring deck crane | Recommended tightening torque for set screw:16.8 Nm; L1:40 mm; G:M6x1; H2:114 mm; A1:35 mm; L:135 mm; C:35.1 kN; J:95 mm; s1:25.8 mm; B:51.6 mm; |
| VSI200414-N slewing ring bearings (Internal gear teeth) | Mass:0.03 kg; Brand:NTN; da min:17 mm; Min operating temperature, Tmin:-20 °C; Fatigue limit load, Cu:0.13 kN; d:15 mm; B:9 mm; Da max:30 mm; f0:13.9; Max operating temperature, Tmax:120 °C; |
| VSA200744-N Four point contact ball bearings (External gear teeth) | L:100 mm; B1:38.9 mm; A1:27 mm; B:25.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:9.5 mm; L1:35 mm; N:M12; H:47.6 mm; d1:51.1 mm; |
| Internal gear teeth four point contact ball slewing ring VSI250855-N | C:25.7 kN; J:130 mm; A1:14 mm; G:M6x1; Weight:1.18 kg; Recommended tightening torque for set screw:8 Nm; L:90 mm; s1:21.45 mm; S:17.5 mm; T max.:100 °C; |
| VSU200414 Four point contact ball bearings (no gear teeth) | SW:3.97 mm; A:32 mm; L3:40 mm; d1:51.1 mm; L1:76 mm; s1:36.3 mm; B1:51.1 mm; G:R1/8"; G1:M24; C0:15.2 kN; |
VSA250955-N slewing bearing ina Video